BKPMC - TOPCOAT, PRIMER, MACHINERY & IMPLEMENT BAR-

  • MSDS: BKPMC
  • Manufacturer: RUST OLEUM CORP
  • Product Name: TOPCOAT, PRIMER, MACHINERY & IMPLEMENT BAR-
  • National Stock Number: 8010-00B180036
Product Identification

Product ID:TOPCOAT, PRIMER, MACHINERY & IMPLEMENT BAR-
MSDS Date:12/18/1989
FSC:8010
NIIN:00B180036
MSDS Number: BKPMC

Responsible Party
RUST-OLEUM CORPORATION
11 HAWTHORNE PARKWAY
VERNON HILLS, IL 60061-1583
US

Emergency Phone: 708-367-7700

Cage: DO883

Contractor
RUST-OLEUM CORPORATION
VERNON HILLS, IL 60061-1583 US

Telephone: 847-367-7700

Cage: DO883

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-25%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15-40%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


HYDROCARBON PROPELLANT

CAS: 68476-86-8

Fraction By Weight: 25%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:CHRONIC: REPORTS HAVE ASSOCIATED
REPEATED AND PROLONGED OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. OVEREXPOSURE TO XYLOL AND TOLUENE
HAS SHOWN LIVER AND CARDIAC ABNORMALI TIES.
Effects of Overexposure:INGESTION CAUSES GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING AND DIARRHEA. INHALATION IS HARMFUL. MAY AFFECT
THE BRAIN OR NERVOUS SYSTEM, CAUSING DIZZINESS, HEADACHE OR NAUSEA.
REPEATED OVEREXPOSURE MAY LEAD TO STAGGERING GAIT, CONFUSION,
UNCONSCIOUSNESS OR COMA. SKIN AND EYE CONTACT CAUSES IRRITATION.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF
RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN., CONTACT A
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE FROM
EXPOSURE, RESTORE/SUPPORT BREATHING AS NECESSARY, NOTIFY A
PHYSICIAN. INGESTIO N: DO NOT INDUCE VOMITING. ASPIRATION OF THIS
MATERIAL INTO THE LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE
FATAL. CONTACT A PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:0F,-18C
Extinguishing Media:MFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
CHEMICAL OR FOAM).
Fire Fighting Procedures:WEAR PROTECTIVE EQUIPMENT, INCLUDING SCBA.
WATER SPRAY MAY BE INEFFECTIVE BUT MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATION
AREA AND REMOVE WITH INERT ABSORBENT AND NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT
PUNCTURE CONTAINERS.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED CHEMICAL CARTRIDGE RESPIRATOR
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY AND ORGANIC VAPORS
DURING SPRAY APPLICATION. IN CONFINED AREAS USE NIOSH APPROVED
SUPPLIED-AIR RESPIRAT ORS OR HOODS.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
VOLUME AND PATTERN TO KEEP TLV BELOW ACCEPTABLE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES W/SPLASH GUARDS
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
WORK CLOTHING AND APRON AS REQUIRED TO AVOID PROLONGED OR REPEATED
CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING CONTENTS
MAY BE HARMFUL OR FATAL.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:<0F,<-18C
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NOT SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS. DO NOT INCINERATE CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.